NUKI - smart lock
      Back to home
      1. Knowledge base
      2. Marketplace
      3. NUKI - smart lock

      NUKI marketplace connection guide for keycode based entry

      Since 2024 february OAth2 type of authentication was introduced to NUKI which supports multiple entry scenarios. Besides Remote access, the new key code based entry is also accessible via this method.

      For the connection, you will need to perform actions on both NUKI web and in your SabeeApp account as well.

      Prerequisites

      1. Install Nuki Smart Lock and connect it to your smartphone by following the NUKI official setup manual. 
      2. Install Nuki Bridge and get your Nuki Smart Lock connected to the Internet. Here you can find the NUKI Bridge installation guide. In case of NUKI 3.0 pro, the bridge is integrated to your lock so please skip this step.
      3. Install NUKI keypads and conenct them to the locks. Learn more how to do that from here.
      4. Create a Nuki Web account to maintain your locks remotely. Click the "Register" link at the bottom-left corner and follow the instructions.
      5. Don't forget to register your lock(s) to the NUKI extranet! Without adding the locks to the NUKI web platform the locks cannot be managed online, therefore cannot be connected with SabeeApp either.


      Settings in the NUKI web.

      1. Please go to the NUKI web’s API menu.
      2. Generate API Token and save it somewhere.
      3. Create Oath2 api key
      4. Please set the OAuth2 redirect url to the following in your NUKI web: https://chm.sabeeapp.com/settings/marketplace?event=nukicode

      Activate the connection in SabeeApp

      Please go to the Settings / Marketplace menu and search for the NUKI item and click on Initiate connection button.

      For the configuration please pay attention to set the following settings:
      1. Select Oauth 2 authentication type

      2. Add Smartlock API token and Oauth2 Api token (Client ID)

      3. Set Smartlock open type as Keycode

      4. Activate the toggle for Smartlock status

      5. After you are ready with the settings, click on the Connection button

      6. You are redirected to the NUKI web where you have to login and accept the terms.

      7. After that, you will be redirected to the NUKI marketplace item and the connection is already active.

      Mapping of the rooms to the locks

      After the connection between NUKI and SabeeApp is established, you will have to connect your SabeeApp rooms to the NUKI locks.

      1. Click the green Plus sign next to to the room where you installed the Smart Lock.


      2. Select the Smart Lock from the list which you want to assign to the room and then click Save

      After that the lock and the room is connected. All the reservations in the connected room will be able to fetch key codes. Learn more about how they will see the codes by clicking here.

      If you would like to disconnect a room from a lock, you can anytime click on the red - sign next to the connected lock.

      !!! IMPORTANT !!! 

      Currently we do not support common doors / rooms access management. So if you have a main entrance with NUKI lock equipped, we will not be able to issue a valid code for that. Codes will only work for the rooms.